$23.00The AirDog Replacement Fuel Filter FF100-2 is a direct replacement Fuel Filter for your AirDog Fuel System. The life expectancy for the AirDog Fuel Filter could be up to 25K miles or a year. However, those figures can change drastically depending on fuel quality. Order a few extra and keep them in your cab or toolbox.
Fits 2011-2014 6.6L LML Duramax.
A5SPBC260 DF-100 2011-2014 Duramax LML (Preset @8-10PSI)
A5SABC110 DF-165 2011-2015 Duramax LML (Preset @8-10PSI)
NEW Quick Connect / Dis-Connect Fittings - Drops Installation Time 30-45 Minutes!
The new AirDog® II Demand Flow Fuel Preporator®
This new model Fuel Preporator® improves on the original by offering demand flow, so that the unit only draws as much fuel from the tank – through the tank module – as is required by the engine, and then returns only air and a dribble of fuel to the tank. What does this mean? Connecting to the tank module means there is no need to drill holes in the fuel tank to install an aftermarket fuel draw straw, so installation with the included fittings is QUICK and EASY. The AirDog II also features either a preset or adjustable stainless steel pressure regulator. As always, all AirDog® II units come complete with fittings, fuel lines, mounting brackets, and full-color installation manual specific to each model truck.
Reliability and Performance! Two powerful reasons to add an AirDog to your diesel pickup! The AirDog provides the proper pressure/flow of fuel to your diesel engine under virtually all operating conditions for PEAK EFFICIENCY with CONSISTENT and MAXIMUM POWER OUTPUT!
Your High Performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air/vapor in the fuel system preventing your engine form producing maximum power and efficiency. Additionally, air/vapor can cause galling and pitting of the injector barrel/plunger assembly and also tip erosion.
The AirDog eliminates the air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time!
The AirDog®II, designed to operate at flows and pressures beyond the maximum requirements of the engine, receives fuel under vacuum from the fuel tank containing entrained air/vapor, particulate contaminates and unknown quantities of water. The fuel passes through the water separator which removes the large particulate contaminates that could damage or jam The gerotor fuel pump. The fuel, with only entrained air/vapor and tiny particulate contaminates remaining enters the fuel pump.
The fuel, under positive pressure flow, enters the fuel filter. As the fuel passes through the filter media and the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated. Through the POSITIVE FUEL AIR SEPARATION FEATURES of the PATENTED FUEL PREPORATOR® the separated air/vapor is discharged from the filter and back to the fuel tank through the Primary Air/Vapor Discharge Port.
The fuel passing through the filter media, free of contaminates & power robbing air/vapor and at pressures and flows always able to meet the needs of the engine, exits the fuel filter through two passageways. First, the fuel for the engine, passes into the fuel pickup tube and on to the engine. Then. the excess fuel not needed by the engine recycles internally through the pressure regulator back to the water separator.
Duramax: Special Fittings for Quick and Easy Installations
Small & Compact: ONLY 7”L X 10”T X 3.2”W
Dual Feed Gerotor Pump: Quiet, Efficient,Preset @ 8psi,
Fits 2011-2014 6.6L LML Duramax.
A6SABC410 DF-165-4G 2011-2014 LML Duramax (Preset @8-10PSI)
Fits 2015 6.6L LML Duramax.
A6SABC413 2015 DF-165-4G LML Duramax (Preset @8-10PSI)
$26.00The AirDog Replacement Water Separator WS100 is a direct replacement for your AirDog Fuel System. The built-in drain allows you to empty any water from the filter during routine maintenance. The life expectancy for the Airdog Water Separator could be up to 25K miles or a year. However, those figures can change drastically depending on fuel quality. Order a few extra and keep them in your cab or toolbox.
Fits 2011-2015 LML Duramax. Please Select 95GPH, 150GPH, 200GPH or 220GPH.
The Titanium Series uses the same blueprint as our HD Series just in a smaller package. It is designed for the pickup while utilizing all the best features of the HD series. Built into a smaller compact version, the Titanium Series offers flow rates up to 220gph. This size difference allows you to tuck the pump closer to the frame for better clearance and less visibility without sacrificing any of the features known to FASS systems. The same motor used on the HD Series (class 8 applications) is also used on our TitaniumSeries, proving once again that quality is #1 at FASS.
Titanium Series Filter Note: The Titanium Series currently has two different filter versions. To confirm which filter you need, it's best to check the part number on the filter or the color of the pump.If your Titanium Series Pump is Blue - This will require the FS-2001 filter. (Older Design)
If your Titanium Series Pump is Grey - This will require the FS-1001 filter. (New Pumps)
(11-15 - 95 GPH) T C11 095G
(11-15 - 150 GPH) T C11 150G
(11-15 - 220 GPH) T C10 220G
(11-15 - 260 GPH) T C10 260G
$33.25The FASS FF-3003 Fuel Filter is a direct replacement for your Titanium Series FASS Fuel System. This filter can also be used to replace the FWS-3003 on the Titanium Series. This filter has a suggested change interval of every 30,000 miles.
$20.90The FASS FS-1001 Water Separator is designed for use with your FASS HD & Titanium Series Fuel Air Separation System. It's suggested that this filter is changed every 30K miles.
Titanium Series Note: The Titanium Series has two different filter versions. To confirm which filter you need, it's best to check the part number on the filter or the color of the pump.
$149.95The XDP Fuel Tank Sump XD182 is the perfect solution for those wanting to maximize fuel delivery to their engine. This “One Hole Design” Fuel Tank Sump is easier to install than others on the market, and it only requires one hole in your fuel tank! The XD182 provides an outlet for fuel on the bottom of your fuel tank, which eliminates the typical ¼ tank issues associated with in-tank draw straws used with aftermarket fuel system such as Air Dog & FASS Pumps.