Fits 1992-2000 6.5L Duramax.
A5SPBC258 DF-100 1992-2000 6.5L Duramax (Preset @8PSI)
A5SABC108 DF-165 1992-2000 6.5L Duramax (Preset @8PSI)
A5SABC111 DF-200 1992-2000 6.5L Duramax (Preset @8PSI)
NEW Quick Connect / Dis-Connect Fittings - Drops Installation Time 30-45 Minutes!
The new AirDog® II Demand Flow Fuel Preporator®
This new model Fuel Preporator® improves on the original by offering demand flow, so that the unit only draws as much fuel from the tank – through the tank module – as is required by the engine, and then returns only air and a dribble of fuel to the tank. What does this mean? Connecting to the tank module means there is no need to drill holes in the fuel tank to install an aftermarket fuel draw straw, so installation with the included fittings is QUICK and EASY. The AirDog II also features either a preset or adjustable stainless steel pressure regulator. As always, all AirDog® II units come complete with fittings, fuel lines, mounting brackets, and full-color installation manual specific to each model truck.
Reliability and Performance! Two powerful reasons to add an AirDog to your diesel pickup! The AirDog provides the proper pressure/flow of fuel to your diesel engine under virtually all operating conditions for PEAK EFFICIENCY with CONSISTENT and MAXIMUM POWER OUTPUT!
Your High Performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air/vapor in the fuel system preventing your engine form producing maximum power and efficiency. Additionally, air/vapor can cause galling and pitting of the injector barrel/plunger assembly and also tip erosion.
The AirDog eliminates the air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time!
The AirDog®II, designed to operate at flows and pressures beyond the maximum requirements of the engine, receives fuel under vacuum from the fuel tank containing entrained air/vapor, particulate contaminates and unknown quantities of water. The fuel passes through the water separator which removes the large particulate contaminates that could damage or jam The gerotor fuel pump. The fuel, with only entrained air/vapor and tiny particulate contaminates remaining enters the fuel pump.
The fuel, under positive pressure flow, enters the fuel filter. As the fuel passes through the filter media and the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated. Through the POSITIVE FUEL AIR SEPARATION FEATURES of the PATENTED FUEL PREPORATOR® the separated air/vapor is discharged from the filter and back to the fuel tank through the Primary Air/Vapor Discharge Port.
The fuel passing through the filter media, free of contaminates & power robbing air/vapor and at pressures and flows always able to meet the needs of the engine, exits the fuel filter through two passageways. First, the fuel for the engine, passes into the fuel pickup tube and on to the engine. Then. the excess fuel not needed by the engine recycles internally through the pressure regulator back to the water separator.
Small & Compact: ONLY 7”L X 10”T X 3.2”W
Dual Feed Gerotor Pump: Quiet, Efficient,
$450.00 $529.00THE PERFECT INSIGHT
$99.00The Edge Products 98601 EGT Accessory Sensor (Non-Expandable) is the perfect option for monitoring exhaust gas temperatures with your Edge CS and CTS. Made for those who are not interested in future expandability and optional future accessories Edge offers a simple, inexpensive non-expandable EGT sensor that allows users to monitor critical exhaust gas temperatures to ensure added power is not creating excessive heat which in turn can cause engine damage.
$29.00The Edge accessory (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories daisy-chain style to the Evolution CS or CTS. This means Edge can create optional accessories that can be added by the owner at any time. A second exhaust gas temperature (EGT) probe is one example of an optional accessory that will be offered by Edge.
Edge Products presents the new Insight CTS2 (Color Touch Screen). With unmatched control and style, the all-new Insight CTS2 offers the most advanced technology in engine monitoring available today. The Insight CTS2 is compatible with any OBDII-enabled vehicle 1996 and newer. The Insight CTS2 offer many of the same great features and benefits users have come to expect from Edge Products, along with a whole host of exciting additional features.
Adjust EFILive Tuned PCMS on-the-fly On 2001-2005 LB7 and LLY Duramax engines you can now change the power levels on-the-fly created by your EFILive custom tuning software with your Edge Insight CTS2! Simply use your EFILive software to change your DSP5 Switch Type from hard wire to serial. Once you are set up to support serial communication, simply use the up and down arrow buttons on your Insight to adjust EFILive tunes on-the-fly.
The Insight CTS2 features a built-in video port that allows users to connect the state-of-the-art Edge back-up camera, or other compatible video source directly to the CTS2 unit.
MYSTYLE SOFTWARE (included)
MyStyle software that allows users to choose from a variety of Edge custom backgrounds or simply upload an image of your choice. Size, crop and save to your CTS2 unit for the ultimate in customizability.
MBRP Inc Offers high quality T-304 Stainless Steel exhaust tips for diesel systems. Each tip is polished to a mirror finish to highlight any exhaust system. Heavy Duty "Bolt-On" Syle, no bulky clamps to hold tip onto tailpipe. Allows for maximum adjustability.
4" inlet, 5" outlet, 12" length